Our shipping department will be closed from Wednesday September 27 thru Friday September 29. Orders placed after 5:00 pm Eastern Daylight Time on Tuesday September 26 will ship starting on Monday October 2. Thank you for your business.
Click on image to enlarge, use right and left arrow keys to scroll slideshow:
Choose your flexible gooseneck and/or rigid arm(s)
Choose your mounting base(s) - Table Clamp, Rail Clamp, Multiclamp, Megaclamp, Round Base, Magnet Base, Plate Mount, Angle Mount or Suction Cup Mount:
Our super-flexible Micro SnakeClamp is ideal wherever a miniature third hand is required. These small clamps are combined with a flexible solid copper lead for precise positioning. Use as a soldering helping hand, model building, jewelry repair, etc.
Our Small Micro Clamp is great for holding small, delicate items and getting into tight places. It includes a 6" long #10 solid copper lead for precise positioning.
Our Large Micro Clamp has a larger jaw opening and reach than it's smaller cousin, and is also well-suited for precision workholding applications. It also includes a 6" long #10 solid copper lead for precise positioning.
We offer 7 different model flexible gooseneck arms in stock and ready to ship:
Our 9", 18" Heavy-Duty, 18" Super-Duty and 24" Heavy-Duty gooseneck arms are very stiff. The exceptions are our 13" and 18" Light-Duty goosenecks which are much more flexible but do not support as much weight. Gooseneck arms are strongest in the vertical position. In this orientation all of our gooseneck arms can support 6 lbs. However with the 18" Light-Duty gooseneck the weight must remain centered over the mount. With the gooseneck arm mounted horizontally, it's weakest orientation, the 9", 18" Heavy-Duty and 24" gooseneck arms can support 2 lbs. without bending; the 18" Super-Duty can support 2-1/2 lbs. and the 13" and 18" Light-Duty goosenecks can each support 1/2 lb.
You can splice two goosenecks together for additional length with our 1" Threaded Stud (SCP-STUD1), sold separately. However a spliced gooseneck will not support as much weight as a single gooseneck.
Or you can combine our 12" Rigid Arm together with flexible gooseneck arms for even more possibilities. Flexible gooseneck arms are limited in reach and strength - but by splicing together rigid arms and flexible gooseneck arms you get the best of both worlds. Use our rigid arms to get the reach you need, then add a flexible gooseneck arm to provide the flexibility. Each rigid arm is 12" long and features the same 3/8"-24 female threads on each end. Rigid arms are hollow and weight 0.35 lbs. Each end has a 4mm set screw and we include a 2mm Allen wrench. One 1" threaded stud is included (SCP-STUD1) with each rigid arm for splicing to a flexible gooseneck arm or another rigid arm.Detailed information about our flexible gooseneck and rigid arms can be found here
Choose from many different mounting base options:
Table Clamp: Our heavy-duty Table Clamp is made of 6mm thick steel and has a black powdercoat finish. It attaches to desks, tables and other surfaces from 1/4″ thick up to 1-5/8″ thick. Includes all hardware for attaching to flexible gooseneck or rigid arm.Assembly Instructions for Table Clamp (pdf)
Rail Clamp: Our Rail Clamp is made of 6mm thick steel and has a black powdercoat finish. It attaches to any round rail, rod or pipe with a diameter of 3/4″ up to 1-3/4″. This mounting option is suitable for attaching lightweight objects such as the iPad Mini and lightweight cameras and video cameras. For attaching heavier objects such as iPads, check out our heavy-duty Multiclamp. Includes all hardware for attaching to flexible gooseneck or rigid arm.Assembly Instructions for Rail Clamp (pdf)
Megaclamp: Our super strong and versatile Megaclamp attaches to both flat and round surfaces. With the included EPDM rubber v-block installed the Megaclamp can securely grab onto round pipes, rods or railings from 1/4" up to 2" diameter. Simply slide the v-block off for attaching to flat surfaces from 3/8" up to 2-5/8" thick. Soft rubber pads protect your mounting surface. The Megaclamp is made of 1/4" thick steel and has a black powdercoat finish. It features two attachment points both parallel and perpendicular to the threaded screw. 3" long handle makes attachment and removal easy. Includes 3/8"-24 flat-head screw and washers for attaching to SnakeClamp brand flexible gooseneck or rigid arms.Assembly Instructions for Megaclamp (pdf)
Plate Mount: Our 3″ x 3″ Plate Mount is made of 6mm thick steel and has a black powdercoat finish. Great for permanently attaching your SnakeClamp to bars, under cabinets, workbenches, etc. Includes (4) #12 x 1″ long wood screws and all hardware for attaching to flexible gooseneck or rigid arm.Assembly Instructions for Plate Mount (pdf)
Angle Mount: Our Angle Mount is made of 6mm thick steel and has a black powdercoat finish. The attaching surface measures 3″ x 3″ and it has a 2″ long flange for attaching a flexible gooseneck or rigid arm. You can permanently attach your SnakeClamp to the side of desks, cabinets and workbenches or even to the back of a bed headboard. Includes (4) #12 x 1″ long wood screws and all hardware for attaching to flexible gooseneck or rigid arm.Assembly Instructions for Angle Mount (pdf)
Round Base: Heavy-duty 2mm thick steel Round Base with black powdercoat finish. Approximately 9″ diameter. Weights just under 2 pounds (unweighted) or 3.8 pounds (with weight). We recommend the weighted version for added stability if mounting heavier items such as iPads to gooseneck arms longer than 9″. If you already have a Round Base we also sell the magnet weight separately. Includes all hardware for attaching to flexible gooseneck or rigid arm.Assembly Instructions for Round Base (pdf)
Magnet Base: Heavy-duty 200 pound hold Magnet Base, 4-7/8″ diameter, 1/2″ thick, 1-1/2 lbs weight. Attach your SnakeClamp to a file cabinet, treadmill machine, refrigerator or wherever you can find a piece of metal! It looks great with it's polished nickel-plated finish. Includes all hardware for attaching to flexible gooseneck or rigid arm.Assembly Instructions for Magnet Base (pdf)
Suction Cup Mount: Our Suction Cup Mount has an extra-strong hold and attaches to any smooth, non-porous surface such as glass, metals, desks, laminate countertops, etc. Suction cup diameter 3.3". For supporting lightweight objects up to 2 lbs. Includes all hardware for attaching to flexible gooseneck or rigid arm.Assembly Instructions for Suction Cup Mount (pdf)
All of our products include a One Year Free Replacement Warrantybr>
Build your SnakeClamp by choosing your combination of attachment, flexible gooseneck and/or rigid arm and mounting base. All attachments and mounting bases include all required hardware for attaching to flexible gooseneck and/or rigid arms. Rigid Arm includes 1" threaded stud for splicing to a flexible gooseneck arm. The threaded stud is also sold separately for splicing gooseneck arms together.