News

Silicone-Covered Flexible Gooseneck Tubes Have Arrived!

Recently we added black silicone as a finish option on our popular 18" light-duty flexible gooseneck tube. By April 2022 we will offer many of our gooseneck tube designs with black and/or light grey silicone coverings.
18" Light-duty flexible gooseneck tube covered in black silicone
18" Light-duty flexible gooseneck tube with black silicone covering
Silicone is widely used in the healthcare industry because of it's ability to be cleaned and sanitized. As you know a flexible gooseneck tube without a covering has plenty of cracks and crevices for germs to hide! We also have customers who need to use their flexible goosenecks in wet or damp environments.  While the gooseneck itself can rust if exposed to moisture, our new silicone covering will help to protect it. The silicone extends from end to end and can be sealed with a silicone caulk if you need it really watertight.
Since the silicone covers the end adapter slot cuts (flat spots for holding with a wrench) and set screw hole you will need to "roll back" the silicone for access. It's easy to do using your two thumbs like this:
Use your thumbs to roll back the silicone covering and expose the end adapters
Roll back the silicone with your thumbs to expose the slot cuts and set screw hole
While some customers will still prefer the beautiful look of our chrome-plated flexible gooseneck tubes we have found that a raw (bare metal - no plating, painting, etc) gooseneck provides the best bending and "stay put" performance (our silicone-covered goosenecks are raw). This is because a gooseneck holds it's position due to the friction between the inner spring wire and outer wire. Unless the painting or plating process is done to exacting standards, painting or plating can interfere with this friction and result in "rebound" (the gooseneck can bounce back from the set position) or cracking and popping noises.
Silicone-covered gooseneck tubes will allow us to provide you with consistently top quality products that will perform well and last for many years.

Read more

Recently we added black silicone as a finish option on our popular 18" light-duty flexible gooseneck tube. By April 2022 we will offer many of our gooseneck tube designs with black and/or light grey silicone coverings.
18" Light-duty flexible gooseneck tube covered in black silicone
18" Light-duty flexible gooseneck tube with black silicone covering
Silicone is widely used in the healthcare industry because of it's ability to be cleaned and sanitized. As you know a flexible gooseneck tube without a covering has plenty of cracks and crevices for germs to hide! We also have customers who need to use their flexible goosenecks in wet or damp environments.  While the gooseneck itself can rust if exposed to moisture, our new silicone covering will help to protect it. The silicone extends from end to end and can be sealed with a silicone caulk if you need it really watertight.
Since the silicone covers the end adapter slot cuts (flat spots for holding with a wrench) and set screw hole you will need to "roll back" the silicone for access. It's easy to do using your two thumbs like this:
Use your thumbs to roll back the silicone covering and expose the end adapters
Roll back the silicone with your thumbs to expose the slot cuts and set screw hole
While some customers will still prefer the beautiful look of our chrome-plated flexible gooseneck tubes we have found that a raw (bare metal - no plating, painting, etc) gooseneck provides the best bending and "stay put" performance (our silicone-covered goosenecks are raw). This is because a gooseneck holds it's position due to the friction between the inner spring wire and outer wire. Unless the painting or plating process is done to exacting standards, painting or plating can interfere with this friction and result in "rebound" (the gooseneck can bounce back from the set position) or cracking and popping noises.
Silicone-covered gooseneck tubes will allow us to provide you with consistently top quality products that will perform well and last for many years.

Read more


Replacement Flexible Gooseneck Arm for Erchonia Laser Stands

A customer has reported that Erchonia has discontinued the flexible arms found on their laser stand.  However our 24" Flexible Gooseneck Arm (combined with two 1 Inch Threaded Studs) works great as an aftermarket replacement:

These arms are awesome!

They fit perfectly on our laser stand.
Our laser company "Erchonia Laser" has discontinued providing the arms, and I accidentally found your company.
Yours are way better and the 1 inch studs fits the stand perfectly.

 

Read more

A customer has reported that Erchonia has discontinued the flexible arms found on their laser stand.  However our 24" Flexible Gooseneck Arm (combined with two 1 Inch Threaded Studs) works great as an aftermarket replacement:

These arms are awesome!

They fit perfectly on our laser stand.
Our laser company "Erchonia Laser" has discontinued providing the arms, and I accidentally found your company.
Yours are way better and the 1 inch studs fits the stand perfectly.

 

Read more


An Affordable Flexible Gooseneck iPad or Tablet Attachment to an Invacare TDX SP2 Power Wheelchair

Among the many uses for SnakeClamp flexible arm products is the assistive devices category. Our products are used to to position and hold all kinds of objects - including iPads/tablets, smartphones, cups/drinks, joystick controllers, etc. - for folks with limited mobility.

We visited recently with a longtime SnakeClamp customer in Charleston, SC who uses an iPad SnakeClamp to attach his iPad to an Invacare TDX SP2 power wheelchair.  The purpose of the visit was to get a first hand look at the powerchair and determine if the SnakeClamp could be permanently attached to the chair.  The powerchair supplier - Bobby Bryant from PHC Health - also joined us.

One of the features of the TDX SP2 is the ability of the chair to tilt back from the base.  So we did not want to attach the SnakeClamp to the base, but rather to the chair itself so that it would also move when the chair was tilted back.  Then the iPad would always be in the same position relative to the user.

Invacare TDX SP2 Power Wheelchair

Invacare TDX SP2 Power Wheelchair

While looking over the chair we discovered a T-slot on the side of the chair which is used to attach various components such as side rails. Bobby had a sample t-nut which we inserted into the slot for testing.

T-slot in Invacare TDX SP2 power wheelchairThe T-Slot bar on the side of the TDX SP2 chair

After some tinkering we came up with the idea of inserting a 3/8" button-head screw into the slot, along with an internal-tooth washer to prevent rotation.

Button head screw inserted into t-slot of Invacare TDX SP2 power wheelchair

3/8" button-head screw inserted into t-slot

On the outside of the t-slot we installed a SnakeClamp coupling (SCP-CPL) which has slot cuts for tightening.  With the internal-tooth lockwasher on the inside of the slot we were able to tighten the assembly without any slipping.

We then attached a SnakeClamp 90 Degree Angle Adapter (SCP-90) and Quick Disconnect (SCP-QD).  The Quick Disconnect is optional, but this allows the customer to quickly remove the entire SnakeClamp flexible arm and iPad from the chair with a quick push and twist.

SnakeClamp Coupling, 90 Degree Angle Adapter and Quick Disconnect

SnakeClamp coupling, 90 degree angle adapter and quick disconnect

It is important to insert the appropriate washers to lock the components together so we put together an illustration:

How to attach a flexible gooseneck arm to a power wheelchair powerchair Invacare TDX SP2

The end result is a happy customer.  Shown is the 18" Super Duty flexible gooseneck arm and Extra Large Adjustable Tablet Mount.

iPad SnakeClamp flexible gooseneck arm attached to Invacare TDX SP2 power wheelchair powerchair

iPad SnakeClamp flexible gooseneck iPad stand mount Invacare TDX SP2 power wheelchair powerchair

 

Thank you to Reynaldo Acosta for inviting us into his home and for the technical assistance of Bobby Bryant.

UPDATE 5/20/19 -  we have added a "Powerchair Hardware Pack" that includes all of the hardware shown in the picture.  This does not include the Quick Disconnect, which is optional and can be purchased separately.

https://snakeclamp.com/products/powerchair-hardware-pack

 

Read more

Among the many uses for SnakeClamp flexible arm products is the assistive devices category. Our products are used to to position and hold all kinds of objects - including iPads/tablets, smartphones, cups/drinks, joystick controllers, etc. - for folks with limited mobility.

We visited recently with a longtime SnakeClamp customer in Charleston, SC who uses an iPad SnakeClamp to attach his iPad to an Invacare TDX SP2 power wheelchair.  The purpose of the visit was to get a first hand look at the powerchair and determine if the SnakeClamp could be permanently attached to the chair.  The powerchair supplier - Bobby Bryant from PHC Health - also joined us.

One of the features of the TDX SP2 is the ability of the chair to tilt back from the base.  So we did not want to attach the SnakeClamp to the base, but rather to the chair itself so that it would also move when the chair was tilted back.  Then the iPad would always be in the same position relative to the user.

Invacare TDX SP2 Power Wheelchair

Invacare TDX SP2 Power Wheelchair

While looking over the chair we discovered a T-slot on the side of the chair which is used to attach various components such as side rails. Bobby had a sample t-nut which we inserted into the slot for testing.

T-slot in Invacare TDX SP2 power wheelchairThe T-Slot bar on the side of the TDX SP2 chair

After some tinkering we came up with the idea of inserting a 3/8" button-head screw into the slot, along with an internal-tooth washer to prevent rotation.

Button head screw inserted into t-slot of Invacare TDX SP2 power wheelchair

3/8" button-head screw inserted into t-slot

On the outside of the t-slot we installed a SnakeClamp coupling (SCP-CPL) which has slot cuts for tightening.  With the internal-tooth lockwasher on the inside of the slot we were able to tighten the assembly without any slipping.

We then attached a SnakeClamp 90 Degree Angle Adapter (SCP-90) and Quick Disconnect (SCP-QD).  The Quick Disconnect is optional, but this allows the customer to quickly remove the entire SnakeClamp flexible arm and iPad from the chair with a quick push and twist.

SnakeClamp Coupling, 90 Degree Angle Adapter and Quick Disconnect

SnakeClamp coupling, 90 degree angle adapter and quick disconnect

It is important to insert the appropriate washers to lock the components together so we put together an illustration:

How to attach a flexible gooseneck arm to a power wheelchair powerchair Invacare TDX SP2

The end result is a happy customer.  Shown is the 18" Super Duty flexible gooseneck arm and Extra Large Adjustable Tablet Mount.

iPad SnakeClamp flexible gooseneck arm attached to Invacare TDX SP2 power wheelchair powerchair

iPad SnakeClamp flexible gooseneck iPad stand mount Invacare TDX SP2 power wheelchair powerchair

 

Thank you to Reynaldo Acosta for inviting us into his home and for the technical assistance of Bobby Bryant.

UPDATE 5/20/19 -  we have added a "Powerchair Hardware Pack" that includes all of the hardware shown in the picture.  This does not include the Quick Disconnect, which is optional and can be purchased separately.

https://snakeclamp.com/products/powerchair-hardware-pack

 

Read more


How Do YOU Use A SnakeClamp?

SnakeClamp has made a few New Year’s Resolutions for 2013! We resolve to make sure that everyone knows just how flexible the SnakeClamp products really are! With 5 different mounting base options: table clamps, round bases, magnet mounts, rail clamps Read More ...

Read more

SnakeClamp has made a few New Year’s Resolutions for 2013! We resolve to make sure that everyone knows just how flexible the SnakeClamp products really are! With 5 different mounting base options: table clamps, round bases, magnet mounts, rail clamps Read More ...

Read more


Now With More Options… for Bases and Mounts!

SnakeClamp is a versatile tool designed to “hold what you need, where you need it.”  It consists of an attachment, a flexible gooseneck arm and a mounting base. And now, there are 5 different options available for a mounting base, Read More ...

Read more

SnakeClamp is a versatile tool designed to “hold what you need, where you need it.”  It consists of an attachment, a flexible gooseneck arm and a mounting base. And now, there are 5 different options available for a mounting base, Read More ...

Read more